Calcined bauxite
Cement Grade Bauxite SNC82

Cement Grade Bauxite SNC82

Cement Grade Bauxite

Calcined bauxite is used in high alumina or calcium aluminate cements range considerably in chemical composition. A high silica content hampers the rapid hardening property of the cement. This means the silica content must be controlled and a typical industry requirement is that the Al2O3:SiO2 ration is around 10:1. And the maximum acceptable amount of Fe2O3 allowed in the low iron oxide type may reach 3%, although it is commonly max. 2.5%.



Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The product obtained after cooling is a hard mineral: calcium aluminate clinker.Crushed or screened, it is used as an aggregate. The composition and colour - ranging from the purest white to jet black - depends on the proportion of each raw material.      

Ground into a fine powder, the clinker becomes calcium aluminate cement (CAC) which forms a paste when mixed with water. This has the ability to harden very quickly: it forms a rigid solid within 24 hours.


Specification for SNC82 cement grade bauxite 

Al2O3: min 82.0               

SiO2: max10.0%

Fe2O3: max 2.5               

TiO2: max 4.0%  

Moisture : max 0.5%       


Available grain size 

5-50mm(passing min 90%), or as customers request.



1MT Jumbo bag

Standard exporting package for sea transportation or air delivery

Special packing requirement is acceptable


SINOCEAN Available Cement Grade Bauxite 









 10.0 max


 2.0 max

 2.0 max


 4.0 max

 4.0 max


 0.5 max

 0.5 max


Other Products
Alumina materials
Contact Us



Tel: +86-371-55970121